- This topic has 18 replies, 7 voices, and was last updated 14 years, 4 months ago by
.
-
Posts
-
We have fixed the problem with the Subvsersive plugins. It was caused due to an incompatible Subversive update.
If you have not made any changes to your profile as suggested in my earlier post, if you open the MyEclipse Configuration Center, you will notice a couple of “Managed Changes” in the Software or Dashboard tab. Apply these changes and the issue should be fixed on restart.
If you followed my earlier instructions, you may be good to go already, if not, please select the Subversive plugins from “Quick-Add” and you can select the two JavaHL items from the related list presented. Apply this change, on restart, depending on your configuration state, you may be presented with additional changes. Apply these changes and restart, Subversive should now be working as expected.
We regret the inconvenience caused, please let us know if you experience further issues.
@Support-Brian wrote:
Update: This issue has now been fixed, please see the last post in this thread for a resolution.
We are working on a resolution for this issue right now. For the moment, please take the following steps to work around this issue.
1) Go to Help > MyEclipse Configuration Center and open the Dashboard tab
2) In the “Quick-Add Populare Plug-ins” please deselect “Subversive Plug-in”. This will show you a number of changes depending on the number of additional subversive related plugins installed.
3) Apply this change and restart MyEclipse when prompted
4) Go to the Help > MyEclipse Configuration Center and expand the “Eclipse 3.5 (Galileo) Discovery” item under Public Sites
5) Expand Collaboration and locate the “Subversive SVN Team Provider (Incubation)” item.
6) Right click this item and choose “Add”.
7) Apply this change and restart MyEclipse when prompted.
8) When you open the “SVN Repositories” view, you will be asked to install additional connectors, scroll to the bottom of this list and select JavaHL 1.6.3. Finish this installation wizard and restart when prompted.Subversive should now work fine for you, let us know if you need further assistance.
We are currently working on a solution which does not require this workaround and will add a note here when that becomes available. Sincerely regret the inconvenience caused.
kishjeff,
The solution is right here at the top of this page, here is a direct link to the post.
